CQ series
The new CQ is the best solution for those sound reinforcement applications requiring a multichannel amplifier with a solid and good sounding characteristic but on an affordable budget. Implementing Power Factor Correction (PFC) technology along with Universal Mains Regulated SMPS power supply and Class D power modules, the CQ series combines in the same amplifier all the functional requirements for most sound reinforcement applications.Features
■ Class D power modules.■ Power Factor Correction technology and Universal Mains R-SMPS.
■ XLR signal input and SpeakON Nl4.
■ Input sensitivity selector on the back panel (0.775V / 1V / 32dB).
■ Routing mode selector on the back panel expect C3500Q(stereo / bridge / parallel).
■ Routing mode selector on the back panel of C3500Q (stereo / parallel).
■ Link mode selector (1-in 4-out / 2-in 4-out).
■ Channel independent protection and clip warning indicators on the front panel.
■ Channel independent power and -5dB/-10dB/-20dB/signal presence indicators on the front panel.
Specifications
| Model | C1300Q | C3500Q |
| Output power (AC 220V / 50Hz. ±10％, All channels driven output power, THD=1%) | ||
| 8Ω stereo | 1300Wx4 | 3500Wx4* |
| 4Ω stereo | 2000Wx4 | 3300Wx4* |
| 2Ω stereo | 2000Wx4 | N/A |
| 8Ω bridge | 3700Wx2 | N/A |
| 4Ω bridge | 3700Wx2 | N/A |
| Other specification | ||
| Frequency response | 20Hz-20kHz (+0/-1dB) | 20Hz-20kHz (+0/-2.5dB) |
| S/N rate | ≥ 98dB | |
| Input sensitivity | 0.775V / 1.0V / 32dB | |
| Input impedance(bal/unbal) | 20kΩ / 10kΩ | |
| Voltage gain (8 ohm） | 42dB | 47dB |
| Cooling | Air flow from front to rear | |
| Dimension / Weight | ||
| Product Dimension(mm) | 483 x 306 x 89 | 483 x 484 x 89 |
| Packaging Dimension(mm) | 560 x 420 x 170 | 620 x 585 x 170 |
| G.W. | 9.7kg | 15.5kg |
Mark:
1、The power is tested under EIA standard.2、*, The power is tested under the condition of 40ms burst, 1kHz sine wave and 1% THD.
3、**, The power is tested under the condition of 20ms burst, 1kHz sine wave and 1% THD.
4、SAE reserves the right to make any changes to the product specifications without prior notice. Final specifications to be found in the user manual.